2022 Volvo S90 Recharge Plug-in Hybrid Memory function for front seat Owners Manual

volvo logo

2022 Volvo S90 Recharge Plug-in Hybrid Memory function for front seat

2022-Volvo-S90-Recharge-Plug-in-Hybrid-Product-Image

Using a stored position for the seat, door mirrors, and head-up display

(Option/accessory)

If the positions for the power seat, the door mirrors and the head-up display have been stored, they can be activated by using the memory buttons.

Using a stored setting

2022 Volvo S90 Recharge Plug-in Hybrid Memory function for front seat-Fig-01

A stored setting can be used with the front door either open or closed:

Open front door

Depress one of the memory buttons 1 (2) or 2 (3) with a short press. Power seat, door mirrors and head-up display move and then stop at the positions stored in the selected memory button.

Closed front door

Hold one of the memory buttons 1 (2) or 2 (3) depressed until seat, door mirrors and head-up display stop in the positions that are stored in the selected memory button.

If the memory button is released, the movement of the seat, door mirrors and head-up display will be stopped.

Warning
  • Because the driver’s seat can be adjusted with the ignition off, children should never be left unattended in the vehicle.
  • Movement of the seat can be STOPPED at any time by pressing any button on the power seat control panel.
  • Do not adjust the seat while driving.
  • Make sure there is nothing under the seats when they are being adjusted.
NoteThe stored positions are saved in the active profile.

Storing position for seat, door mirrors and head-up display

(Option/accessory)

You can store the position for power seat, door mirrors and head-up display in the memory buttons.

Store two different positions for the power seat, the door mirrors and the head-up display using the memory buttons. The buttons are located on the inside of one of the front doors or both.

2022 Volvo S90 Recharge Plug-in Hybrid Memory function for front seat-Fig-02
  1. Button M for storing settings.
  2. Memory button.
  3. Memory button.

Storing a position

  1. Adjust seat, door mirrors and head-up display to the desired position.
  2. Press and hold the M button depressed. The light indicator in the button illuminates.
  3. Within three seconds, press and hold the 1 or 2 button.
    • When the position has been stored in the selected memory button, an acoustic signal can be heard and the light indicator in the M button extinguishes.

If none of the memory buttons is depressed within three seconds then the M button extinguishes and no storing takes place.

The seat, the door mirrors or the head-up display must be readjusted before a new memory can be set.

NoteThe stored positions are saved in the active profile.

Leave a Comment